Skip to the content

Computer Networking and Telecommunications Research

Salford Strowger Demonstration Project

In the early days of the telephone if you wanted to make a call you had to ask the local telephone operator to establish the connection for you. However, that all changed thanks to an American undertaker living in Kansas. Indeed had Almon B Strowger been the only undertaker in that city then maybe history would have taken a different course. For Almon was convinced that his business was suffering because the local telephone operator was the wife of his competitor. So when someone picked up the phone and asked to be connected to the undertaker, Almon had his suspicions that the operator was connecting such calls to his competitor and not him!

Salford Strowger project being demonstrated

Strowger therefore set about eliminating the operator and in so doing patented the automatic telephone switch in 1891. To make this switch work, the humble telephone also had to undergo a transformation and acquire a rotary dial. Now, if someone wanted to make a call, they could dial the number from their telephone handset with each number generating a series of electrical pulses that drove the electro-mechanical switch at the exchange to connect the call. The world’s first Strowger automatic telephone exchange opened in La Porte, Indiana in 1892.

The UK would have to wait until the 18th May 1912 before the first Strowger exchange opened in Epsom, London. All of the equipment for this exchange was manufactured by the Automatic Electric Company and imported from America via the Automatic Telephone Manufacturing Company which had established its premises at Edge Lane, Liverpool in 1911. Strowger switches were adopted throughout the telephone network and the technology would go on to deliver 83 years of service. The last of the UK’s Strowger exchanges was taken out of service on 23rd June 1995 at Crawford in Scotland.


In celebration of the 100th anniversary of the arrival of the first Strowger automatic telephone exchange in the UK, we have decided to create a full working demonstration unit that can be used to show the basic principles of how a telephone exchange works (the technology may have advanced but the underlying functions are still fundamentally the same) and at the same time preserve another piece of telecommunications history.

Our planned system will comprise two group selectors, one final selector and three telephones. This will allow us to represent 4 number dialling, the first two numbers being handled by each of the two group selectors and the last two digits by the final selector. Each telephone will connect to the first group selector via its own uniselector and a ringing machine will provide all of the associated tones. With this arrangement we will be able to make one phone call from any telephone to either one of the remaining two. If you then try and make a call using the third telephone, appropriate busy tones will be heard. A key feature of this unit is that it must be portable and so the whole thing will be constructed on its own purpose built trolley as shown below.

 

Plan showing the layout of tehe Strowger demonstration unit

 

Stage 1: (May 2012) The kit of parts and Strowger tools start to be assembled.

Picture showing a range of Strowger selectors and a ringing machine A picture showing our set of Strowger tools

 

 

Stage 2: (May 2012) Help arrives in the form of Andy Simmons from openreach.

Andy Simmons of Openreach has joined the project and is pictured here next to a range of Strowger components

 

Stage 3: (June 2012) The metal work begins to take shape.

 

Stage 4: (July 2012) The Strowger selectors are put in place, lined up with their switch contacts and the initial wiring is made from the power supply and ringing machine.

A picture showing the strowger selectors in place on the metal work

A picture showing the assembled unit with the covers now in place on the selectors A rear view of the unit showing some of the initial wiring being made

 

Stage 5: (July 2012) The final selector is tested using an engineer's butt unit and it works! In this test we are using the butt unit (out of shot) to dial two numbers. The first forces the selector to move upwards and the second to rotate to the right. When off-hook, the selector automatically resets itself. This is a 2000 type selector which means that under reset conditions, the wipers pass through the remainder of the switch bank before returning to the start position.

 

 

Stage 6: (July 2012) It is now time to wire up the switch banks and to test both group selectors and the final selector. With two group selectors and one final selector we have created a system that can handle 4 digit numbering. The first stage is to connect the P wires for the selectors (top part of the switch bank). These allow each selector to find the next available selector in the hierarchy. Our system is a very small scale system and so, the first group selector finds the second and the second finds the final selector. We are only permitting certain numbers to be dialled and therefore several of the levels on each group selector will be connected to a busy signal (earth). Shown here are the switch banks and the wiring which is taken onto a rear patch panel.

Picture showing the final selector in palce and the two switch banks for the group selectors picture showing the rear of the unit where the p wire and voice circuits are being wired via a patch panel

 

Now for the testing! The two group selectors and final selector are all in place. An engineer's butt unit is used to dial four digits. The first digit drives the first group selector which moves up to the bank equal to the number having been dialled. It then searches for a spare second stage group selector and the P-wire wiring allows it to stop at the first step in and select the second group selector. The next digit dialled drives this second group selector up to the level equal to the number being dialled and it then searches for a final selector, with the P-wire forcing it to stop at the first step. The third digit dialled now drives the final selector up by the number of levels dialled and then the fourth digit rotates the final selector by that amount. At this stage, having dialled all four digits, the called telephone should be connected and ringing. However, that part of the system has not yet been completed and so this test is limited to simply checking the three selectors.

 

 

Stage 7: (August 2012) The next stage in development is to connect the uniselectors and the K and LR relays. Our system is designed to support three telephones and therefore we need three uniselectors and three sets of relays. These are shown here ready to assmebly onto the main framework.

Picture showing the three uniselectors and their associated K and LR relay sets

 

The next step is to install the shelf onto which these uniselectors and relays will be attached. In our system this shelf will also carry a tone box as shown here.

 

Picture showing the uniselector shelf in place and the tone box attached.

 

Stage 8: (September 2012) The next stage is to install the uniselectors and the K and LR relays onto the shelf supports, wire then into the system and add the fuse panel as shown below.

 

Picture showing the uniselectors and K and LR relays attached to their shelf alongside the fuse panel.

Once installed, the uniselectors needed to be tested. In this case, lifting a telephone off-hook should result in the uniselector searching for a free first group selector, which it does!

 

Stage 9: (September 2012) And so to the final complete system testing. Our Strowger demo unit is now complete with three telephones attached. In this video Andy Simmons is testing the unit by making a phone call from one telephone to another. Note how when he lifts the handset, you can hear the uniselector connected to that phone rotate until it finds a free first group selector. Then, as he dials each of the four digits, the first and then the second group selector move, followed by the final selector which responds to the last two digits dialled. At that point the call is routed through and the dialled telephone rings. When he lifts the handset of that phone, the voice circuit is connected. Finally, the system clears once he returns the handset of telephone that initiated the call to the on-hook position.

 

Manchester Science Festival 2012

Our goal had always been to have the Strowger unit working so that it could be showcased at the Manchester Science Festival held in October 2012 which was also the centenary year of the opening of the first Strowger exchange within the UK. As part of the Science Festival we held a public telecommunications exhibition (From semaphore to smartphone) within the University of Salford's building at MediaCity Salford over the weekend of Saturday 27th and Sunday 28th October. Shown here is Andy Simmons proudly demonstrating our Strowger unit to Sian Wynn-Jones from BT Heritage.

Picture showing Andy Simmons demonstrating the Strowger unit to Sian Wynn Jones from BT Heritage at the Manchester Science Festival in october 2012.

 

The BT People Awards

We were absolutely delighted to hear that Andy Simmons of Openreach has won the BT People Awards (Arts and Heritage) in March 2013 for his work on our Strowger project. This award acknowledges Andy's excellent contribution to our project and thanks him for volunteering his time to our project and presents the University with a cash prize that will help us continue with our public engagement work.

BT People Awards logo

 

BT Chairman's Award

Following on from winning a BT People's Award in March 2013 we were delighted to hear that Andy had been shortlisted for a BT Chairman's Award. On 11th June 2013 at an event held at BT Tower in London it was announced that Andy had won the BT Chairman's Award for the Arts and Heritage category. Once again, this award recognises Andy's immense commitment and contribution to the project and acknowledges the importance of ensuring we are able to preserve and continue to demonstrate some of the older tehcnology that once formed the heart of our telephone network. Click on the logo below to find out more about this award and to watch a short video profiling Andy's work.

BT Chairman's Award logo

 

The Project Team

Shown here is the project team. On the left is Andy Simmons from Openreach with behind him, Nigel Linge from the University of Salford and on the right Michael Clegg from the mechanical workshop within the School of Computing, Science and Engineering at the University of Salford. Other team members working behing the scenes are Mike Penney, Mike Jones and Duncan Bottrill who all helped in providing materials or general assistance to the project. We are grateful to all of them!

Picture showing the main project team comprising Andy Simmons from Openreach with Nigel Linge and Michael Clegg from the University of Salford.

With thanks to . . . .

In the construction of this Strowger demonstration unit we are grateful for help received from the following groups and organisations:

Openreach

BT Archives

The East Lancashire Railway

The Churnet Valley Railway

Avoncroft Museum of Historic Buildings which is part of Connected Earth

and for funding received from the College of Science and Technology Beacon Seed Awards